Cherokee County, NC: flood zone, zoning and property lines by address
Free, no account. Or open the North Carolina map and tap a lot.
Towns in Cherokee County: Andrews, Murphy.
Flood zone by address
ParcelSheet reads FEMA's National Flood Hazard Layer at the lot: the zone, whether it is a high risk area where lenders ask for flood insurance, and the base flood elevation where FEMA lists one. FEMA's countywide study for Cherokee County has 166 FIRM panels, the newest effective April 2010; no coastal V zones are mapped in it.
The official panel and any Letter of Map Amendment are at FEMA's Map Service Center. An elevation certificate for a Cherokee house comes from a licensed surveyor and is often on file with the county or city building office.
Property lines
The parcel outline, parcel number and mapped size come from the NC OneMap statewide parcel layer (each county tax office's parcels, published by the NC Center for Geographic Information and Analysis), so a Cherokee lot shows the same lines the tax office draws. Cherokee County covers about 291,545 acres of land and 7,120 acres of water.
Mapped lines are approximate. The Cherokee County tax office keeps the parcel record (Cherokee County website); every county's office is on the state's county assessors list; a licensed surveyor sets the true corners.
Zoning
Cherokee County zones its unincorporated land, and Andrews, Murphy each zone the land inside their limits. ParcelSheet shows the use the tax office lists for the lot and links the county planning office for the district, the uses it allows and the lot size it needs.
ADU and guest houses
Chapter 160D of the North Carolina General Statutes lets local governments allow an accessory dwelling unit on a lot with a house. Whether a Cherokee lot can add one depends on its district; the county planning office has the rule. ParcelSheet shows the mapped lot size and the ground's slope, the first two things the question turns on.
Septic and soil
ParcelSheet reads the USDA soil survey at the lot: the soil's name, its septic absorption rating and whether it is prime farmland. Cherokee County is soil survey area NC039, Cherokee County, North Carolina, last updated September 2026, on Web Soil Survey.
A new or changed septic system in Cherokee County needs a permit from the Cherokee County health department, under the NC DHHS On-Site Water Protection Branch, which tests the soil on the lot itself.
Setbacks
Setbacks in Cherokee County come from the zoning district: the front, side and rear distances a house must keep. ParcelSheet does not draw setback lines; the county zoning office gives them for the lot's district, and Andrews and Murphy for land inside their limits.
Hazards that apply
- Wetlands and wildfire. ParcelSheet shows the National Wetlands Inventory near a Cherokee lot and the Forest Service wildfire hazard rating at it.
Questions
Is my house in a flood zone in Cherokee County?
Type the address in the box above and ParcelSheet reads FEMA's flood zone at the lot's center. FEMA's countywide flood map for Cherokee County has 166 panels, the newest effective April 2010. A lender or insurer uses the official FIRM panel; FEMA's Map Service Center has it.
How do I find property lines in Cherokee County?
Open the North Carolina map, type the address, and the parcel outline from the county tax office shows on the map with its parcel number and mapped size. Mapped lines are approximate; only a licensed surveyor sets the true corners.
What is my property zoned in Cherokee County?
Zoning in Cherokee County is set by the county for unincorporated land and by each city (such as Andrews, Murphy) inside its own limits. ParcelSheet shows the use code the tax office lists and links the office that sets the zoning; the planning office has the final word.
Can I build an ADU in Cherokee County?
Chapter 160D of the North Carolina General Statutes lets counties and cities allow an accessory dwelling unit, and each sets its own rules. In Cherokee County ask the zoning office for the lot's district first; ParcelSheet shows the lot size as mapped so you can see the room you have.
Do I need a septic permit in Cherokee County?
Yes. A new or changed septic system in Cherokee County needs a permit from the Cherokee County health department, under the NC DHHS On-Site Water Protection Branch. ParcelSheet shows the USDA soil survey's septic rating at the lot, from survey area NC039 (Cherokee County, North Carolina).
Next to Cherokee County: Clay County, Graham County, Macon County.
The North Carolina map · All North Carolina counties · Flood zones explained · FIRM panels and LOMAs · All 50 states