ParcelSheet

Gilmer County, WV zoning map, flood zone and property lines by address

Free, no account. Or open the West Virginia map and tap a lot.

Towns in Gilmer County: Glenville.

Flood zone by address

ParcelSheet reads FEMA's National Flood Hazard Layer at the lot: the zone, whether it is a high risk area where lenders ask for flood insurance, and the base flood elevation where FEMA lists one. FEMA's countywide study for Gilmer County has 53 FIRM panels, the newest effective June 2009; no coastal V zones are mapped in it.

The official panel and any Letter of Map Amendment are at FEMA's Map Service Center. An elevation certificate for a Gilmer house comes from a licensed surveyor and is often on file with the county or city building office.

Property lines

The parcel outline, parcel number and mapped size come from the West Virginia statewide parcel layer (WV GIS Technical Center, from each county assessor), so a Gilmer lot shows the same lines the county assessor draws. Gilmer County covers about 216,642 acres of land and 1,009 acres of water.

Mapped lines are approximate. The Gilmer County assessor keeps the parcel record (Gilmer County website); a licensed surveyor sets the true corners.

Zoning

Gilmer County zones its unincorporated land, and Glenville zones the land inside its limits. ParcelSheet shows the use the county assessor lists for the lot and links the county planning commission for the district, the uses it allows and the lot size it needs.

ADU and guest houses

Under West Virginia's land use law (W. Va. Code chapter 8A), local governments can allow an accessory dwelling unit on a lot with a house. Whether a Gilmer lot can add one depends on its district; the county planning commission has the rule. ParcelSheet shows the mapped lot size and the ground's slope, the first two things the question turns on.

Septic and soil

ParcelSheet reads the USDA soil survey at the lot: the soil's name, its septic absorption rating and whether it is prime farmland. Gilmer County is soil survey area WV021, Gilmer County, West Virginia, last updated August 2026, on Web Soil Survey.

A new or changed septic system in Gilmer County needs a permit from the Gilmer County health department (WV Office of Environmental Health Services).

Setbacks

Setbacks in Gilmer County come from the zoning district: the front, side and rear distances a house must keep. ParcelSheet does not draw setback lines; the county zoning office gives them for the lot's district, and Glenville for land inside its limits.

Hazards that apply

Questions

Is my house in a flood zone in Gilmer County?

Type the address in the box above and ParcelSheet reads FEMA's flood zone at the lot's center. FEMA's countywide flood map for Gilmer County has 53 panels, the newest effective June 2009. A lender or insurer uses the official FIRM panel; FEMA's Map Service Center has it.

How do I find property lines in Gilmer County?

Open the West Virginia map, type the address, and the parcel outline from the Gilmer County assessor shows on the map with its parcel number and mapped size. Mapped lines are approximate; only a licensed surveyor sets the true corners.

What is my property zoned in Gilmer County?

Zoning in Gilmer County is set by the county for unincorporated land and by each city (such as Glenville) inside its own limits. ParcelSheet shows the use code the county assessor lists and links the office that sets the zoning; the planning office has the final word.

Can I build an ADU in Gilmer County?

Under West Virginia's land use law (W. Va. Code chapter 8A), counties and cities can allow an accessory dwelling unit, and each sets its own rules. In Gilmer County ask the zoning office for the lot's district first; ParcelSheet shows the lot size as mapped so you can see the room you have.

Do I need a septic permit in Gilmer County?

Yes. A new or changed septic system in Gilmer County needs a permit from the Gilmer County health department (WV Office of Environmental Health Services). ParcelSheet shows the USDA soil survey's septic rating at the lot, from survey area WV021 (Gilmer County, West Virginia).

What can I build on 5 acres in Gilmer County?

Zoning in Gilmer County is set by the county for unincorporated land and each city inside its own limits (such as Glenville). The zoning district decides the uses, how many homes and the smallest lot it allows on 5 acres. ParcelSheet shows the lot size as mapped and the use code on the parcel record; the planning office has the district and its rules. See the Gilmer County website.

What are the residential setbacks in Gilmer County (2026)?

Setbacks in Gilmer County come from the zoning code of the county, or of the city when the lot is inside city limits: the front, side and rear distances depend on the lot's district. ParcelSheet does not draw setback lines or give a number it did not read; the zoning office gives them for the district. See the Gilmer County website.

Next to Gilmer County: Braxton County, Calhoun County, Doddridge County, Lewis County, Ritchie County.

The West Virginia map · All West Virginia counties · Flood zones explained · FIRM panels and LOMAs · All 50 states