Brooke County, WV zoning map, flood zone and property lines by address
Free, no account. Or open the West Virginia map and tap a lot.
Towns in Brooke County: Follansbee, Wellsburg, Hooverson Heights.
Flood zone by address
ParcelSheet reads FEMA's National Flood Hazard Layer at the lot: the zone, whether it is a high risk area where lenders ask for flood insurance, and the base flood elevation where FEMA lists one. FEMA's countywide study for Brooke County has 34 FIRM panels, the newest effective April 2010; no coastal V zones are mapped in it.
The official panel and any Letter of Map Amendment are at FEMA's Map Service Center. An elevation certificate for a Brooke house comes from a licensed surveyor and is often on file with the county or city building office.
Property lines
The parcel outline, parcel number and mapped size come from the West Virginia statewide parcel layer (WV GIS Technical Center, from each county assessor), so a Brooke lot shows the same lines the county assessor draws. Brooke County covers about 56,983 acres of land and 2,160 acres of water.
Mapped lines are approximate. The Brooke County assessor keeps the parcel record (Brooke County website); a licensed surveyor sets the true corners.
Zoning
Brooke County zones its unincorporated land, and Follansbee, Wellsburg each zone the land inside their limits. ParcelSheet shows the use the county assessor lists for the lot and links the county planning commission for the district, the uses it allows and the lot size it needs.
ADU and guest houses
Under West Virginia's land use law (W. Va. Code chapter 8A), local governments can allow an accessory dwelling unit on a lot with a house. Whether a Brooke lot can add one depends on its district; the county planning commission has the rule. ParcelSheet shows the mapped lot size and the ground's slope, the first two things the question turns on.
Septic and soil
ParcelSheet reads the USDA soil survey at the lot: the soil's name, its septic absorption rating and whether it is prime farmland. Brooke County is soil survey area WV604, Brooke, Hancock, and Ohio Counties, West Virginia, last updated August 2026, on Web Soil Survey.
A new or changed septic system in Brooke County needs a permit from the Brooke County health department (WV Office of Environmental Health Services).
Setbacks
Setbacks in Brooke County come from the zoning district: the front, side and rear distances a house must keep. ParcelSheet does not draw setback lines; the county zoning office gives them for the lot's district, and Follansbee and Wellsburg for land inside their limits.
Hazards that apply
- Wetlands and wildfire. ParcelSheet shows the National Wetlands Inventory near a Brooke lot and the Forest Service wildfire hazard rating at it.
Questions
Is my house in a flood zone in Brooke County?
Type the address in the box above and ParcelSheet reads FEMA's flood zone at the lot's center. FEMA's countywide flood map for Brooke County has 34 panels, the newest effective April 2010. A lender or insurer uses the official FIRM panel; FEMA's Map Service Center has it.
How do I find property lines in Brooke County?
Open the West Virginia map, type the address, and the parcel outline from the Brooke County assessor shows on the map with its parcel number and mapped size. Mapped lines are approximate; only a licensed surveyor sets the true corners.
What is my property zoned in Brooke County?
Zoning in Brooke County is set by the county for unincorporated land and by each city (such as Follansbee, Wellsburg) inside its own limits. ParcelSheet shows the use code the county assessor lists and links the office that sets the zoning; the planning office has the final word.
Can I build an ADU in Brooke County?
Under West Virginia's land use law (W. Va. Code chapter 8A), counties and cities can allow an accessory dwelling unit, and each sets its own rules. In Brooke County ask the zoning office for the lot's district first; ParcelSheet shows the lot size as mapped so you can see the room you have.
Do I need a septic permit in Brooke County?
Yes. A new or changed septic system in Brooke County needs a permit from the Brooke County health department (WV Office of Environmental Health Services). ParcelSheet shows the USDA soil survey's septic rating at the lot, from survey area WV604 (Brooke, Hancock, and Ohio Counties, West Virginia).
What can I build on 5 acres in Brooke County?
Zoning in Brooke County is set by the county for unincorporated land and each city inside its own limits (such as Follansbee, Wellsburg). The zoning district decides the uses, how many homes and the smallest lot it allows on 5 acres. ParcelSheet shows the lot size as mapped and the use code on the parcel record; the planning office has the district and its rules. See the Brooke County website.
What are the residential setbacks in Brooke County (2026)?
Setbacks in Brooke County come from the zoning code of the county, or of the city when the lot is inside city limits: the front, side and rear distances depend on the lot's district. ParcelSheet does not draw setback lines or give a number it did not read; the zoning office gives them for the district. See the Brooke County website.
Next to Brooke County: Hancock County, Ohio County.
The West Virginia map · All West Virginia counties · Flood zones explained · FIRM panels and LOMAs · All 50 states