Millard County, UT zoning map, flood zone and property lines by address
Free, no account. Or open the Utah map and tap a lot.
Towns in Millard County: Delta, Fillmore.
Flood zone by address
ParcelSheet reads FEMA's National Flood Hazard Layer at the lot: the zone, whether it is a high risk area where lenders ask for flood insurance, and the base flood elevation where FEMA lists one. FEMA has 18 FIRM panels covering Millard County, the newest effective December 2012; no coastal V zones are mapped in it.
The official panel and any Letter of Map Amendment are at FEMA's Map Service Center. An elevation certificate for a Millard house comes from a licensed surveyor and is often on file with the county or city building office.
Property lines
The parcel outline, parcel number and mapped size come from the Utah Geospatial Resource Center (UGRC), statewide parcels from county recorders and assessors, so a Millard lot shows the same lines the county assessor draws. Millard County covers about 4,342,708 acres of land and 32,937 acres of water.
Mapped lines are approximate. The Millard County assessor keeps the parcel record (Millard County website); a licensed surveyor sets the true corners.
Zoning
Millard County zones its unincorporated land, and Delta, Fillmore each zone the land inside their limits. ParcelSheet shows the use the county assessor lists for the lot and links the county planning and zoning office for the district, the uses it allows and the lot size it needs.
ADU and guest houses
Under Utah's County Land Use, Development, and Management Act (Utah Code Title 17, Chapter 79), local governments can allow an accessory dwelling unit on a lot with a house. Whether a Millard lot can add one depends on its district; the county planning and zoning office has the rule. ParcelSheet shows the mapped lot size and the ground's slope, the first two things the question turns on.
Septic and soil
ParcelSheet reads the USDA soil survey at the lot: the soil's name, its septic absorption rating and whether it is prime farmland. Millard County is soil survey area UT618, Millard County, Utah - Eastern Part, last updated September 2026, on Web Soil Survey.
A new or changed septic system in Millard County needs a permit from the local health department that serves Millard County (under Utah DEQ onsite wastewater rules, R317-4).
Setbacks
Setbacks in Millard County come from the zoning district: the front, side and rear distances a house must keep. ParcelSheet does not draw setback lines; the county zoning office gives them for the lot's district, and Delta and Fillmore for land inside their limits.
Hazards that apply
- Wetlands and wildfire. ParcelSheet shows the National Wetlands Inventory near a Millard lot and the Forest Service wildfire hazard rating at it.
Questions
Is my house in a flood zone in Millard County?
Type the address in the box above and ParcelSheet reads FEMA's flood zone at the lot's center. FEMA has 18 flood map panels covering Millard County, the newest effective December 2012. A lender or insurer uses the official FIRM panel; FEMA's Map Service Center has it.
How do I find property lines in Millard County?
Open the Utah map, type the address, and the parcel outline from the Millard County assessor shows on the map with its parcel number and mapped size. Mapped lines are approximate; only a licensed surveyor sets the true corners.
What is my property zoned in Millard County?
Zoning in Millard County is set by the county for unincorporated land and by each city (such as Delta, Fillmore) inside its own limits. ParcelSheet shows the use code the county assessor lists and links the office that sets the zoning; the planning office has the final word.
Can I build an ADU in Millard County?
Under Utah's County Land Use, Development, and Management Act (Utah Code Title 17, Chapter 79), counties and cities can allow an accessory dwelling unit, and each sets its own rules. In Millard County ask the zoning office for the lot's district first; ParcelSheet shows the lot size as mapped so you can see the room you have.
Do I need a septic permit in Millard County?
Yes. A new or changed septic system in Millard County needs a permit from the local health department that serves Millard County (under Utah DEQ onsite wastewater rules, R317-4). ParcelSheet shows the USDA soil survey's septic rating at the lot, from survey area UT618 (Millard County, Utah - Eastern Part).
What can I build on 5 acres in Millard County?
Zoning in Millard County is set by the county for unincorporated land and each city inside its own limits (such as Delta, Fillmore). The zoning district decides the uses, how many homes and the smallest lot it allows on 5 acres. ParcelSheet shows the lot size as mapped and the use code on the parcel record; the planning office has the district and its rules. See the Millard County website.
What are the residential setbacks in Millard County (2026)?
Setbacks in Millard County come from the zoning code of the county, or of the city when the lot is inside city limits: the front, side and rear distances depend on the lot's district. ParcelSheet does not draw setback lines or give a number it did not read; the zoning office gives them for the district. See the Millard County website.
Next to Millard County: Beaver County, Juab County, Sanpete County, Sevier County.
The Utah map · All Utah counties · Flood zones explained · FIRM panels and LOMAs · All 50 states