Beaver County, UT zoning map, flood zone and property lines by address
Free, no account. Or open the Utah map and tap a lot.
Towns in Beaver County: Beaver, Milford.
Flood zone by address
ParcelSheet reads FEMA's National Flood Hazard Layer at the lot: the zone, whether it is a high risk area where lenders ask for flood insurance, and the base flood elevation where FEMA lists one. FEMA has 3 FIRM panels covering Beaver County, the newest effective December 2012; no coastal V zones are mapped in it.
The official panel and any Letter of Map Amendment are at FEMA's Map Service Center. An elevation certificate for a Beaver house comes from a licensed surveyor and is often on file with the county or city building office.
Property lines
The parcel outline, parcel number and mapped size come from the Utah Geospatial Resource Center (UGRC), statewide parcels from county recorders and assessors, so a Beaver lot shows the same lines the county assessor draws. Beaver County covers about 1,653,063 acres of land and 1,309 acres of water.
Mapped lines are approximate. The Beaver County assessor keeps the parcel record (Beaver County website); a licensed surveyor sets the true corners.
Zoning
Beaver County zones its unincorporated land, and Beaver, Milford each zone the land inside their limits. ParcelSheet shows the use the county assessor lists for the lot and links the county planning and zoning office for the district, the uses it allows and the lot size it needs.
ADU and guest houses
Under Utah's County Land Use, Development, and Management Act (Utah Code Title 17, Chapter 79), local governments can allow an accessory dwelling unit on a lot with a house. Whether a Beaver lot can add one depends on its district; the county planning and zoning office has the rule. ParcelSheet shows the mapped lot size and the ground's slope, the first two things the question turns on.
Septic and soil
ParcelSheet reads the USDA soil survey at the lot: the soil's name, its septic absorption rating and whether it is prime farmland. Beaver County is soil survey area UT626, Beaver County, Utah - Western Part, last updated September 2026, on Web Soil Survey.
A new or changed septic system in Beaver County needs a permit from the local health department that serves Beaver County (under Utah DEQ onsite wastewater rules, R317-4).
Setbacks
Setbacks in Beaver County come from the zoning district: the front, side and rear distances a house must keep. ParcelSheet does not draw setback lines; the county zoning office gives them for the lot's district, and Beaver and Milford for land inside their limits.
Hazards that apply
- Wetlands and wildfire. ParcelSheet shows the National Wetlands Inventory near a Beaver lot and the Forest Service wildfire hazard rating at it.
Questions
Is my house in a flood zone in Beaver County?
Type the address in the box above and ParcelSheet reads FEMA's flood zone at the lot's center. FEMA has 3 flood map panels covering Beaver County, the newest effective December 2012. A lender or insurer uses the official FIRM panel; FEMA's Map Service Center has it.
How do I find property lines in Beaver County?
Open the Utah map, type the address, and the parcel outline from the Beaver County assessor shows on the map with its parcel number and mapped size. Mapped lines are approximate; only a licensed surveyor sets the true corners.
What is my property zoned in Beaver County?
Zoning in Beaver County is set by the county for unincorporated land and by each city (such as Beaver, Milford) inside its own limits. ParcelSheet shows the use code the county assessor lists and links the office that sets the zoning; the planning office has the final word.
Can I build an ADU in Beaver County?
Under Utah's County Land Use, Development, and Management Act (Utah Code Title 17, Chapter 79), counties and cities can allow an accessory dwelling unit, and each sets its own rules. In Beaver County ask the zoning office for the lot's district first; ParcelSheet shows the lot size as mapped so you can see the room you have.
Do I need a septic permit in Beaver County?
Yes. A new or changed septic system in Beaver County needs a permit from the local health department that serves Beaver County (under Utah DEQ onsite wastewater rules, R317-4). ParcelSheet shows the USDA soil survey's septic rating at the lot, from survey area UT626 (Beaver County, Utah - Western Part).
What can I build on 5 acres in Beaver County?
Zoning in Beaver County is set by the county for unincorporated land and each city inside its own limits (such as Beaver, Milford). The zoning district decides the uses, how many homes and the smallest lot it allows on 5 acres. ParcelSheet shows the lot size as mapped and the use code on the parcel record; the planning office has the district and its rules. See the Beaver County website.
What are the residential setbacks in Beaver County (2026)?
Setbacks in Beaver County come from the zoning code of the county, or of the city when the lot is inside city limits: the front, side and rear distances depend on the lot's district. ParcelSheet does not draw setback lines or give a number it did not read; the zoning office gives them for the district. See the Beaver County website.
Next to Beaver County: Garfield County, Iron County, Millard County, Piute County, Sevier County.
The Utah map · All Utah counties · Flood zones explained · FIRM panels and LOMAs · All 50 states