Waller County, TX zoning map, flood zone and property lines by address

Towns in Waller County: Hempstead, Prairie View, Brookshire.

Flood zone by address

ParcelSheet reads FEMA's National Flood Hazard Layer at the lot: the zone, whether it is a high risk area where lenders ask for flood insurance, and the base flood elevation where FEMA lists one. FEMA's countywide study for Waller County has 22 FIRM panels, the newest effective May 2019; no coastal V zones are mapped in it.

The official panel and any Letter of Map Amendment are at FEMA's Map Service Center. An elevation certificate for a Waller house comes from a licensed surveyor and is often on file with the county or city building office.

Property lines

The parcel outline, parcel number and mapped size come from the Texas statewide parcel layer (StratMap Land Parcels, Texas Geographic Information Office, from each county appraisal district), so a Waller lot shows the same lines the appraisal district draws. Waller County covers about 328,545 acres of land and 2,918 acres of water.

Mapped lines are approximate. The Waller County appraisal district keeps the parcel record; every county's office is on the state's Comptroller county directory; a licensed surveyor sets the true corners.

Zoning

Texas counties cannot zone land. Under Texas Local Government Code chapter 211 only cities zone: in Waller County, Hempstead, Prairie View, Brookshire each zone the land inside their limits. Land in Waller County outside city limits has no zoning district; deed restrictions, the county's subdivision rules (Local Government Code chapter 232), the septic permit and the floodplain rules still apply.

So check city limits first. ParcelSheet shows the use the appraisal district lists for the lot and the town it sits in; the city planning office has the district for land inside a city. What you can build outside city limits in Texas.

ADU and guest houses

Outside city limits in Waller County no county zoning limits a guest house or second home on a lot; deed restrictions and the septic permit, which must cover both homes, decide it. Inside a city, the city's zoning code sets the rule. ParcelSheet shows the mapped lot size and the ground's slope, the first two things the question turns on.

Septic and soil

ParcelSheet reads the USDA soil survey at the lot: the soil's name, its septic absorption rating and whether it is prime farmland. Waller County is soil survey area TX600, Austin and Waller Counties, Texas, last updated September 2026, on Web Soil Survey.

A new or changed septic system in Waller County needs a permit from the Waller County authorized agent of the TCEQ on-site sewage facility program, or the TCEQ region office where the county has none, which tests the soil on the lot itself.

Setbacks

Outside city limits in Waller County there are no county zoning setbacks; deed restrictions and the county's subdivision rules can still set distances. Inside a city such as Hempstead or Prairie View, the city's zoning code sets the front, side and rear setbacks for the lot's district. ParcelSheet does not draw setback lines.

Hazards that apply

• Wetlands and wildfire. ParcelSheet shows the National Wetlands Inventory near a Waller lot and the Forest Service wildfire hazard rating at it.

Questions

Is my house in a flood zone in Waller County?

Type the address in the box above and ParcelSheet reads FEMA's flood zone at the lot's center. FEMA's countywide flood map for Waller County has 22 panels, the newest effective May 2019. A lender or insurer uses the official FIRM panel; FEMA's Map Service Center has it.

How do I find property lines in Waller County?

Open the Texas map, type the address, and the parcel outline from the Waller County appraisal district shows on the map with its parcel number and mapped size. Mapped lines are approximate; only a licensed surveyor sets the true corners.

What is my property zoned in Waller County?

Zoning in Waller County is set only inside city limits, by each city (such as Hempstead, Prairie View); Texas counties cannot zone, so land outside city limits has no zoning district. ParcelSheet shows the use code on the parcel record and names the municipality; the city planning office has the final word.

Can I build an ADU in Waller County?

Outside city limits in Waller County there is no county zoning, so no zoning rule limits a guest house; deed restrictions, the septic permit and the floodplain rules still apply. Inside a city, the city's zoning code under Texas Local Government Code chapter 211 sets the rule. ParcelSheet shows the lot size as mapped so you can see the room you have.

Do I need a septic permit in Waller County?

Yes. A new or changed septic system in Waller County needs a permit from the Waller County authorized agent of the TCEQ on-site sewage facility program, or the TCEQ region office where the county has none. ParcelSheet shows the USDA soil survey's septic rating at the lot, from survey area TX600 (Austin and Waller Counties, Texas).

What can I build on 5 acres in Waller County?

Texas counties cannot zone land, so check city limits first. If the 5 acres are inside a city (such as Hempstead, Prairie View), that city's zoning sets what can go on them; outside city limits there is no county zoning, and deed restrictions, the county's subdivision and septic rules and the floodplain rules still apply. See the Waller County appraisal district.

What are the residential setbacks in Waller County (2026)?

Texas counties do not zone, so outside city limits there are no county zoning setbacks; deed restrictions and the county's subdivision rules can still set distances. Inside a city such as Hempstead or Prairie View, the city's zoning code sets the front, side and rear setbacks for the lot's district. ParcelSheet does not draw setback lines. See the Waller County appraisal district.

Next to Waller County: Austin County, Fort Bend County, Grimes County, Harris County, Montgomery County, Washington County.

The Texas map · All Texas counties · Flood zones explained · FIRM panels and LOMAs · All 50 states