ParcelSheet

Butler County, IA zoning map, flood zone and property lines by address

Free, no account. Or open the Iowa map and tap a lot.

Towns in Butler County: Parkersburg, Clarksville, Shell Rock.

Flood zone by address

ParcelSheet reads FEMA's National Flood Hazard Layer at the lot: the zone, whether it is a high risk area where lenders ask for flood insurance, and the base flood elevation where FEMA lists one. FEMA's countywide study for Butler County has 38 FIRM panels, the newest effective December 2020; no coastal V zones are mapped in it.

The official panel and any Letter of Map Amendment are at FEMA's Map Service Center. An elevation certificate for a Butler house comes from a licensed surveyor and is often on file with the county or city building office.

Property lines

The parcel outline, parcel number and mapped size come from the Iowa county parcel layers (each county publishes its own), so a Butler lot shows the same lines the county assessor draws. Butler County covers about 371,288 acres of land and 1,037 acres of water.

Mapped lines are approximate. The Butler County assessor keeps the parcel record (Butler County website); a licensed surveyor sets the true corners.

Zoning

Butler County zones its unincorporated land, and Parkersburg, Clarksville, Shell Rock each zone the land inside their limits. ParcelSheet shows the use the county assessor lists for the lot and links the county zoning office for the district, the uses it allows and the lot size it needs.

ADU and guest houses

Under Iowa's county zoning law (Iowa Code Chapter 335), local governments can allow an accessory dwelling unit on a lot with a house. Whether a Butler lot can add one depends on its district; the county zoning office has the rule. ParcelSheet shows the mapped lot size and the ground's slope, the first two things the question turns on.

Septic and soil

ParcelSheet reads the USDA soil survey at the lot: the soil's name, its septic absorption rating and whether it is prime farmland. Butler County is soil survey area IA023, Butler County, Iowa, last updated September 2026, on Web Soil Survey.

A new or changed septic system in Butler County needs a permit from the Butler County environmental health department (county board of health, under Iowa Department of Natural Resources rules).

Setbacks

Setbacks in Butler County come from the zoning district: the front, side and rear distances a house must keep. ParcelSheet does not draw setback lines; the county zoning office gives them for the lot's district, and Parkersburg, Clarksville, Shell Rock for land inside their limits.

Hazards that apply

Questions

Is my house in a flood zone in Butler County?

Type the address in the box above and ParcelSheet reads FEMA's flood zone at the lot's center. FEMA's countywide flood map for Butler County has 38 panels, the newest effective December 2020. A lender or insurer uses the official FIRM panel; FEMA's Map Service Center has it.

How do I find property lines in Butler County?

Open the Iowa map, type the address, and the parcel outline from the Butler County assessor shows on the map with its parcel number and mapped size. Mapped lines are approximate; only a licensed surveyor sets the true corners.

What is my property zoned in Butler County?

Zoning in Butler County is set by the county for unincorporated land and by each city (such as Parkersburg, Clarksville) inside its own limits. ParcelSheet shows the use code the county assessor lists and links the office that sets the zoning; the planning office has the final word.

Can I build an ADU in Butler County?

Under Iowa's county zoning law (Iowa Code Chapter 335), counties and cities can allow an accessory dwelling unit, and each sets its own rules. In Butler County ask the zoning office for the lot's district first; ParcelSheet shows the lot size as mapped so you can see the room you have.

Do I need a septic permit in Butler County?

Yes. A new or changed septic system in Butler County needs a permit from the Butler County environmental health department (county board of health, under Iowa Department of Natural Resources rules). ParcelSheet shows the USDA soil survey's septic rating at the lot, from survey area IA023 (Butler County, Iowa).

What can I build on 5 acres in Butler County?

Zoning in Butler County is set by the county for unincorporated land and each city inside its own limits (such as Parkersburg, Clarksville). The zoning district decides the uses, how many homes and the smallest lot it allows on 5 acres. ParcelSheet shows the lot size as mapped and the use code on the parcel record; the planning office has the district and its rules. See the Butler County website.

What are the residential setbacks in Butler County (2026)?

Setbacks in Butler County come from the zoning code of the county, or of the city when the lot is inside city limits: the front, side and rear distances depend on the lot's district. ParcelSheet does not draw setback lines or give a number it did not read; the zoning office gives them for the district. See the Butler County website.

Next to Butler County: Black Hawk County, Bremer County, Floyd County, Franklin County, Grundy County, Hardin County.

The Iowa map · All Iowa counties · Flood zones explained · FIRM panels and LOMAs · All 50 states