Danville city, VA zoning map, flood zone and property lines by address
Free, no account. Or open the Virginia map and tap a lot.
Flood zone by address
ParcelSheet reads FEMA's National Flood Hazard Layer at the lot: the zone, whether it is a high risk area where lenders ask for flood insurance, and the base flood elevation where FEMA lists one. FEMA has 27 FIRM panels covering Danville city, the newest effective September 2010; no coastal V zones are mapped in it.
The official panel and any Letter of Map Amendment are at FEMA's Map Service Center. An elevation certificate for a Danville house comes from a licensed surveyor and is often on file with the county or city building office.
Property lines
The parcel outline, parcel number and mapped size come from the Virginia statewide parcel layer (Virginia Geographic Information Network, from each locality), so a Danville lot shows the same lines the real estate assessor draws. Danville city covers about 27,394 acres of land and 575 acres of water.
Mapped lines are approximate. The Danville city real estate assessor keeps the parcel record (Danville city website); a licensed surveyor sets the true corners.
Zoning
In Danville city zoning is set by the city itself, an independent city outside any county. ParcelSheet shows the use code on the lot's parcel record and the municipality it sits in; the city planning office has the district, the uses it allows and the lot size it needs.
ADU and guest houses
Under Virginia's zoning law (Code of Virginia Title 15.2, Chapter 22), the city itself, an independent city outside any county can allow an accessory dwelling unit on a lot with a house. Whether a Danville lot can add one depends on its district; the city planning office has the rule. ParcelSheet shows the mapped lot size and the ground's slope, the first two things the question turns on.
Septic and soil
ParcelSheet reads the USDA soil survey at the lot: the soil's name, its septic absorption rating and whether it is prime farmland. Danville city is soil survey area VA143, Pittsylvania County and the City of Danville, Virginia, last updated August 2026, on Web Soil Survey.
A new or changed septic system in Danville city needs a permit from the Danville city local health department (Virginia Department of Health).
Setbacks
Setbacks in Danville city come from the zoning district: the front, side and rear distances a house must keep. ParcelSheet does not draw setback lines; the city planning office gives them for the lot's district.
Hazards that apply
- Wetlands and wildfire. ParcelSheet shows the National Wetlands Inventory near a Danville lot and the Forest Service wildfire hazard rating at it.
Questions
Is my house in a flood zone in Danville city?
Type the address in the box above and ParcelSheet reads FEMA's flood zone at the lot's center. FEMA has 27 flood map panels covering Danville city, the newest effective September 2010. A lender or insurer uses the official FIRM panel; FEMA's Map Service Center has it.
How do I find property lines in Danville city?
Open the Virginia map, type the address, and the parcel outline from the Danville city real estate assessor shows on the map with its parcel number and mapped size. Mapped lines are approximate; only a licensed surveyor sets the true corners.
What is my property zoned in Danville city?
Zoning in Danville city is set by the city itself, an independent city outside any county. ParcelSheet shows the use code on the parcel record and names the municipality; the city planning office has the final word.
Can I build an ADU in Danville city?
Under Virginia's zoning law (Code of Virginia Title 15.2, Chapter 22), the city itself, an independent city outside any county can allow an accessory dwelling unit, and each sets its own rules. In Danville city ask the city planning office for the lot's district first; ParcelSheet shows the lot size as mapped so you can see the room you have.
Do I need a septic permit in Danville city?
Yes. A new or changed septic system in Danville city needs a permit from the Danville city local health department (Virginia Department of Health). ParcelSheet shows the USDA soil survey's septic rating at the lot, from survey area VA143 (Pittsylvania County and the City of Danville, Virginia).
What can I build on 5 acres in Danville city?
Zoning in Danville city is set by the city itself, an independent city outside any county. The zoning district decides the uses, how many homes and the smallest lot it allows on 5 acres. ParcelSheet shows the lot size as mapped and the use code on the parcel record; the city planning office has the district and its rules. See the Danville city website.
What are the residential setbacks in Danville city (2026)?
Setbacks in Danville city come from the zoning code of the municipality the lot sits in: the front, side and rear distances depend on the lot's district. ParcelSheet does not draw setback lines or give a number it did not read; the city planning office gives them for the district. See the Danville city website.
Next to Danville city: Pittsylvania County.
The Virginia map · All Virginia counties · Flood zones explained · FIRM panels and LOMAs · All 50 states