Blount County, TN zoning map, flood zone and property lines by address
Free, no account. Or open the Tennessee map and tap a lot.
Towns in Blount County: Maryville, Alcoa, Eagleton Village.
Flood zone by address
ParcelSheet reads FEMA's National Flood Hazard Layer at the lot: the zone, whether it is a high risk area where lenders ask for flood insurance, and the base flood elevation where FEMA lists one. FEMA's countywide study for Blount County has 51 FIRM panels, the newest effective September 2007; no coastal V zones are mapped in it.
The official panel and any Letter of Map Amendment are at FEMA's Map Service Center. An elevation certificate for a Blount house comes from a licensed surveyor and is often on file with the county or city building office.
Property lines
The parcel outline, parcel number and mapped size come from the Tennessee Comptroller property boundaries layer (from each county assessor of property), so a Blount lot shows the same lines the assessor of property draws. Blount County covers about 357,660 acres of land and 4,994 acres of water.
Mapped lines are approximate. The Blount County assessor of property keeps the parcel record (Blount County website); a licensed surveyor sets the true corners.
Zoning
Blount County zones its unincorporated land, and Maryville, Alcoa each zone the land inside their limits. ParcelSheet shows the use the assessor of property lists for the lot and links the county planning office for the district, the uses it allows and the lot size it needs.
ADU and guest houses
Under Tennessee's zoning laws (Tennessee Code Title 13, Chapter 7), local governments can allow an accessory dwelling unit on a lot with a house. Whether a Blount lot can add one depends on its district; the county planning office has the rule. ParcelSheet shows the mapped lot size and the ground's slope, the first two things the question turns on.
Septic and soil
ParcelSheet reads the USDA soil survey at the lot: the soil's name, its septic absorption rating and whether it is prime farmland. Blount County is soil survey area TN609, Blount County Area, Tennessee, last updated August 2026, on Web Soil Survey.
A new or changed septic system in Blount County needs a permit from the TDEC Division of Water Resources, or the county health department in a county that runs its own septic program, which tests the soil on the lot itself.
Setbacks
Setbacks in Blount County come from the zoning district: the front, side and rear distances a house must keep. ParcelSheet does not draw setback lines; the county zoning office gives them for the lot's district, and Maryville and Alcoa for land inside their limits.
Hazards that apply
- Wetlands and wildfire. ParcelSheet shows the National Wetlands Inventory near a Blount lot and the Forest Service wildfire hazard rating at it.
Questions
Is my house in a flood zone in Blount County?
Type the address in the box above and ParcelSheet reads FEMA's flood zone at the lot's center. FEMA's countywide flood map for Blount County has 51 panels, the newest effective September 2007. A lender or insurer uses the official FIRM panel; FEMA's Map Service Center has it.
How do I find property lines in Blount County?
Open the Tennessee map, type the address, and the parcel outline from the Blount County assessor of property shows on the map with its parcel number and mapped size. Mapped lines are approximate; only a licensed surveyor sets the true corners.
What is my property zoned in Blount County?
Zoning in Blount County is set by the county for unincorporated land and by each city (such as Maryville, Alcoa) inside its own limits. ParcelSheet shows the use code the assessor of property lists and links the office that sets the zoning; the planning office has the final word.
Can I build an ADU in Blount County?
Under Tennessee's zoning laws (Tennessee Code Title 13, Chapter 7), counties and cities can allow an accessory dwelling unit, and each sets its own rules. In Blount County ask the zoning office for the lot's district first; ParcelSheet shows the lot size as mapped so you can see the room you have.
Do I need a septic permit in Blount County?
Yes. A new or changed septic system in Blount County needs a permit from the TDEC Division of Water Resources, or the county health department in a county that runs its own septic program. ParcelSheet shows the USDA soil survey's septic rating at the lot, from survey area TN609 (Blount County Area, Tennessee).
What can I build on 5 acres in Blount County?
Zoning in Blount County is set by the county for unincorporated land and each city inside its own limits (such as Maryville, Alcoa). The zoning district decides the uses, how many homes and the smallest lot it allows on 5 acres. ParcelSheet shows the lot size as mapped and the use code on the parcel record; the planning office has the district and its rules. See the Blount County website.
What are the residential setbacks in Blount County (2026)?
Setbacks in Blount County come from the zoning code of the county, or of the city when the lot is inside city limits: the front, side and rear distances depend on the lot's district. ParcelSheet does not draw setback lines or give a number it did not read; the zoning office gives them for the district. See the Blount County website.
Next to Blount County: Knox County, Loudon County, Monroe County, Sevier County.
The Tennessee map · All Tennessee counties · Flood zones explained · FIRM panels and LOMAs · All 50 states