Stevens County, MN zoning map, flood zone and property lines by address
Free, no account. Or open the Minnesota map and tap a lot.
Towns in Stevens County: Morris.
Flood zone by address
ParcelSheet reads FEMA's National Flood Hazard Layer at the lot: the zone, whether it is a high risk area where lenders ask for flood insurance, and the base flood elevation where FEMA lists one. FEMA's countywide study for Stevens County has 22 FIRM panels, the newest effective September 2024; no coastal V zones are mapped in it.
The official panel and any Letter of Map Amendment are at FEMA's Map Service Center. An elevation certificate for a Stevens house comes from a licensed surveyor and is often on file with the county or city building office.
Property lines
The parcel outline, parcel number and mapped size come from the Minnesota open parcel layer (Minnesota Geospatial Information Office, from the counties that share their parcels), so a Stevens lot shows the same lines the county assessor draws. Stevens County covers about 360,743 acres of land and 7,496 acres of water.
Mapped lines are approximate. The Stevens County assessor keeps the parcel record (Stevens County website); a licensed surveyor sets the true corners.
Zoning
In Minnesota zoning is set by the county, the township or the city, depending on where the lot is: in Stevens County, Morris zones the land inside its limits. ParcelSheet shows the use code on the lot's parcel record and the municipality it sits in; the county, township or city zoning office has the district, the uses it allows and the lot size it needs. The Stevens County website lists the county's municipalities.
ADU and guest houses
Under Minnesota's zoning laws (Minnesota Statutes chapters 394 and 462), the county, the township or the city, depending on where the lot is can allow an accessory dwelling unit on a lot with a house. Whether a Stevens lot can add one depends on its district; the county, township or city zoning office has the rule. ParcelSheet shows the mapped lot size and the ground's slope, the first two things the question turns on.
Septic and soil
ParcelSheet reads the USDA soil survey at the lot: the soil's name, its septic absorption rating and whether it is prime farmland. Stevens County is soil survey area MN149, Stevens County, Minnesota, last updated September 2026, on Web Soil Survey.
A new or changed septic system in Stevens County needs a permit from the Stevens County septic (SSTS) program under the Minnesota Pollution Control Agency rules.
Setbacks
Setbacks in Stevens County come from the zoning district: the front, side and rear distances a house must keep. ParcelSheet does not draw setback lines; the county, township or city zoning office gives them for the lot's district, and Morris for land inside its limits.
Hazards that apply
- Wetlands and wildfire. ParcelSheet shows the National Wetlands Inventory near a Stevens lot and the Forest Service wildfire hazard rating at it.
Questions
Is my house in a flood zone in Stevens County?
Type the address in the box above and ParcelSheet reads FEMA's flood zone at the lot's center. FEMA's countywide flood map for Stevens County has 22 panels, the newest effective September 2024. A lender or insurer uses the official FIRM panel; FEMA's Map Service Center has it.
How do I find property lines in Stevens County?
Open the Minnesota map, type the address, and the parcel outline from the Stevens County assessor shows on the map with its parcel number and mapped size. Mapped lines are approximate; only a licensed surveyor sets the true corners.
What is my property zoned in Stevens County?
Zoning in Stevens County is set by the county, the township or the city, depending on where the lot is (such as Morris). ParcelSheet shows the use code on the parcel record and names the municipality; the county, township or city zoning office has the final word.
Can I build an ADU in Stevens County?
Under Minnesota's zoning laws (Minnesota Statutes chapters 394 and 462), the county, the township or the city, depending on where the lot is can allow an accessory dwelling unit, and each sets its own rules. In Stevens County ask the county, township or city zoning office for the lot's district first; ParcelSheet shows the lot size as mapped so you can see the room you have.
Do I need a septic permit in Stevens County?
Yes. A new or changed septic system in Stevens County needs a permit from the Stevens County septic (SSTS) program under the Minnesota Pollution Control Agency rules. ParcelSheet shows the USDA soil survey's septic rating at the lot, from survey area MN149 (Stevens County, Minnesota).
What can I build on 5 acres in Stevens County?
Zoning in Stevens County is set by the county, the township or the city, depending on where the lot is (such as Morris). The zoning district decides the uses, how many homes and the smallest lot it allows on 5 acres. ParcelSheet shows the lot size as mapped and the use code on the parcel record; the county, township or city zoning office has the district and its rules. See the Stevens County website.
What are the residential setbacks in Stevens County (2026)?
Setbacks in Stevens County come from the zoning code of the municipality the lot sits in: the front, side and rear distances depend on the lot's district. ParcelSheet does not draw setback lines or give a number it did not read; the county, township or city zoning office gives them for the district. See the Stevens County website.
Next to Stevens County: Big Stone County, Grant County, Pope County, Swift County.
The Minnesota map · All Minnesota counties · Flood zones explained · FIRM panels and LOMAs · All 50 states