Taylor County, KY zoning map, flood zone and property lines by address
Free, no account. Or open the Kentucky map and tap a lot.
Towns in Taylor County: Campbellsville.
Flood zone by address
ParcelSheet reads FEMA's National Flood Hazard Layer at the lot: the zone, whether it is a high risk area where lenders ask for flood insurance, and the base flood elevation where FEMA lists one. FEMA's countywide study for Taylor County has 24 FIRM panels, the newest effective May 2011; no coastal V zones are mapped in it.
The official panel and any Letter of Map Amendment are at FEMA's Map Service Center. An elevation certificate for a Taylor house comes from a licensed surveyor and is often on file with the county or city building office.
Property lines
The parcel outline, parcel number and mapped size come from the Kentucky county parcel layers (each county publishes its own), so a Taylor lot shows the same lines the county property valuation administrator draws. Taylor County covers about 170,507 acres of land and 6,658 acres of water.
Mapped lines are approximate. The Taylor County property valuation administrator keeps the parcel record (Taylor County website); a licensed surveyor sets the true corners.
Zoning
Taylor County zones its unincorporated land, and Campbellsville zones the land inside its limits. ParcelSheet shows the use the county property valuation administrator lists for the lot and links the planning and zoning office for the county for the district, the uses it allows and the lot size it needs.
ADU and guest houses
Under Kentucky's planning and zoning law (Kentucky Revised Statutes Chapter 100), local governments can allow an accessory dwelling unit on a lot with a house. Whether a Taylor lot can add one depends on its district; the planning and zoning office for the county has the rule. ParcelSheet shows the mapped lot size and the ground's slope, the first two things the question turns on.
Septic and soil
ParcelSheet reads the USDA soil survey at the lot: the soil's name, its septic absorption rating and whether it is prime farmland. Taylor County is soil survey area KY620, Green and Taylor Counties, Kentucky, last updated September 2026, on Web Soil Survey.
A new or changed septic system in Taylor County needs a permit from the Taylor County health department (Kentucky Department for Public Health onsite sewage program).
Setbacks
Setbacks in Taylor County come from the zoning district: the front, side and rear distances a house must keep. ParcelSheet does not draw setback lines; the county zoning office gives them for the lot's district, and Campbellsville for land inside its limits.
Hazards that apply
- Wetlands and wildfire. ParcelSheet shows the National Wetlands Inventory near a Taylor lot and the Forest Service wildfire hazard rating at it.
Questions
Is my house in a flood zone in Taylor County?
Type the address in the box above and ParcelSheet reads FEMA's flood zone at the lot's center. FEMA's countywide flood map for Taylor County has 24 panels, the newest effective May 2011. A lender or insurer uses the official FIRM panel; FEMA's Map Service Center has it.
How do I find property lines in Taylor County?
Open the Kentucky map, type the address, and the parcel outline from the Taylor County property valuation administrator shows on the map with its parcel number and mapped size. Mapped lines are approximate; only a licensed surveyor sets the true corners.
What is my property zoned in Taylor County?
Zoning in Taylor County is set by the county for unincorporated land and by each city (such as Campbellsville) inside its own limits. ParcelSheet shows the use code the county property valuation administrator lists and links the office that sets the zoning; the planning office has the final word.
Can I build an ADU in Taylor County?
Under Kentucky's planning and zoning law (Kentucky Revised Statutes Chapter 100), counties and cities can allow an accessory dwelling unit, and each sets its own rules. In Taylor County ask the zoning office for the lot's district first; ParcelSheet shows the lot size as mapped so you can see the room you have.
Do I need a septic permit in Taylor County?
Yes. A new or changed septic system in Taylor County needs a permit from the Taylor County health department (Kentucky Department for Public Health onsite sewage program). ParcelSheet shows the USDA soil survey's septic rating at the lot, from survey area KY620 (Green and Taylor Counties, Kentucky).
What can I build on 5 acres in Taylor County?
Zoning in Taylor County is set by the county for unincorporated land and each city inside its own limits (such as Campbellsville). The zoning district decides the uses, how many homes and the smallest lot it allows on 5 acres. ParcelSheet shows the lot size as mapped and the use code on the parcel record; the planning office has the district and its rules. See the Taylor County website.
What are the residential setbacks in Taylor County (2026)?
Setbacks in Taylor County come from the zoning code of the county, or of the city when the lot is inside city limits: the front, side and rear distances depend on the lot's district. ParcelSheet does not draw setback lines or give a number it did not read; the zoning office gives them for the district. See the Taylor County website.
Next to Taylor County: Adair County, Casey County, Green County, Larue County, Marion County.
The Kentucky map · All Kentucky counties · Flood zones explained · FIRM panels and LOMAs · All 50 states